To set up an IPVanish VPN client,follow these organized steps:

1. Download the Installer:

   Visit the official IPVanish website (https://ipvanish.com/) and download the latest installer.

2. Install the Installer:

   Unzip the installer and follow the installation instructions provided by IPVanish, typically in the "Install" section.

3. Configure the VPN Client:

   • Basic VPN Setup: Go to the "Configure" section and select "Basic."
     • Enter your public IP address (e.g., 192.168.1.1).
     • Create a username and password, using fake credentials for testing.
     • Click "Add" to set up your authentication.

4. Set Up Public Wi-Fi:

   • Go to "Configure" > "Public Wi-Fi" and select all your public devices.
   • Ensure they are connected to your public network and within your local network.

5. Connect to Your Network:

   Confirm that your local network is open and connected to the internet.

6. Test Your VPN:

   • Open your browser and type your username and password to access your account.
   • If successful, your VPN is working.

7. Security Settings:

   • Enable encryption and 2FA (e.g., using your social media credentials).
   • Disable browser extensions that might block access.

8. Log in and Test:

   • Log in to your account using your username and password.
   • Test accessing websites to confirm everything works.

9. Troubleshooting:

   If issues arise, check your credentials, Wi-Fi setup, or network connectivity.

By following these steps, you should have successfully set up and configured an IPVanish VPN client on your local network.